Here's How to Tray Gold in Mining

Surely you remember that one of the childhood pleasures by the river was panning for gold.

Back then, maybe you didn't really get the gold. However, now you can do it again and get the same results after knowing how to pan for gold properly. If you are curious, you need to listen to the following reviews.

Effective Ways to Pan for Gold for Amateurs

Although it looks easy, panning for gold actually requires extra patience and physical strength. For more details, here are the steps on how to pan for gold.

Find Locations and Set Up Tools

Most of the gold is in watersheds. You can use a gold detector to find out the exact places that could potentially contain gold. Choose river areas with a minimum depth of 15 cm, as shallower areas generally have more sand and silt.

The characteristics of the right place is a calm river flow. This makes it easier for you when doing the material separation process. If the current is too strong, it is feared that gold particles will be carried away by the current.

Choose a place with large rocks or shady trees. The goal is for you to have shelter or lean on during the gold panning process.

After finding the right place, prepare a gold panning tool. The tool is a filter, of which there are two types. It is made of metal and plastic. If you are a beginner, choose a plastic filter, as it is much lighter. Also use a black tool, to make it easier to identify gold.

Start Shift

The gold pot method begins by partially filling the sieve with soil and gravel. Then, dip the filter containing the gravel into the water. Pay attention to the water limit for soaking, make sure it is just below the surface of the river.

Do the typical gold miner move, which is to shake the filter periodically. Apparently, the direction of its movement has its own purpose. The back and forth motion of both sides aims to lift lighter concentrates, such as rocks and gravel. Make sure your movement is not so strong that the contents of the filter spill into the river.

Once the stones and gravel are separated, start making gentle circular motions. This process aims to dissolve fine materials such as dust or clay. In this process, roots may also rise to the filter surface. At this stage, make sure all dirt, dust, and clay have been removed from the filter.

Concentrated Cleaning Process

This process is a phase that starts to get heavy. Because, some of your energy has been drained in the previous phase. In this process, the goal is to remove fine sand as well as fine gravel.

The movement is the same as the first gold pot, only with very gentle strength. Make sure your movement makes the water on the sieve surface wobble so that it can shift the fine material and leave a gold concentrate at the bottom of the sieve. Keep repeating this movement until the smooth material is completely clean.

Black Sand Removal Process

In this process, there should be a small amount of material remaining in the sieve. This process still requires the help of water, but only a little. The height of the water needed is only about 2 cm. The goal is that the black sand can be separated from the gold concentrate that may be contained.

The movement that can separate the two is quite easy. Tilt the filter to one side, so that the water is moving in the same direction. The black sand will be carried away by the movement of the water, while the gold material will remain stationary. The remaining gold will be stored or collected.

That's how to pan for gold that looks simple but requires its own patience and tenacity. Repeat all steps, so you get more gold.